RESIN STANDING WATER - 2-component epoxy resin 180ML

Content: 180ML (120 resin + 60 hardener). Contains 2 syringes.   This is a two-component colored resin intended to simulate standing water in sceneries, dioramas, etc. Low-odor two-component resin. The resin and hardener come in separate bottles. Two syringes are included in the box.   The mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes around 24 hours. The components must be mixed well by stirring the mixture. It is advisable to avoid shaking during the process to prevent the generation of air bubbles that will be trapped. Pour into an enclosed space without cracks to contain the liquid. Recommended thickness of up to 5cm.   Instructions and guide included in the box.